What Are the Steps Involved in Hardwood Refinishing – TheFlooringlady

July 30, 2011
the why and how of refinishing hardwood floors
When you reside in an older home having hardwood floors, you would probably think about getting done with refinishing or replacing. Floor refinishing is a suitable option as it does not necessitate removing the old floor or buying a new material, however refinishing hardwood floors is not a simple project either.

 

The need for refinishing hardwood is imperative to prevent the floors and its life. If you are about to take up the task of hardwood refinishing, you should be aware of the process. You should understand that refinishing and sanding is unforgiving task. Make a flaw and it will reflect. But, a refinished floor brings charming look to a room like not any other project.

 

 

Making decision to refinish your hardwood floor

 

You must at first determine whether your floor requires a compete refinishing job

 

  • When a drop of water soaks or beads in slowly, you may do it with good polishing and cleaning
  • When a drop of water soaks in fast, the wood fibers might be exposed already and the floor required refinishing
  • When the floor is squeaky, deeply stained, warped or otherwise damaged, you should repair it first and refinish it.

 

While you decide to refinish hardwood, keep certain things in mind,

 

  • As the sanding process can avoid a lot of surface, your floor requires a minimum ¾ inch thickness

 

  • When your floor is more than ¾ inch thin, you would want to hire a pro to get rid of accidentally sanding dow

 

  • to subfloor

 

  • A groove floor can’t be sanded as much times as a plank floor

 

  • Some new floors are as thinner as ¼ inches and cannot be refinished

 

  • When your hardwood floor is beneath other floor covering, old floor need to be removed

 

Preparation done before floor refinishing

 

The key to very successful home improvements projects involves preparation and this task is indeed no exception. Take your time to clean the surface and sanded properly. This task is where you will need most to have patience. Here the steps that describing the preparation for floor refinishing,

 

  • Remove everything out of the room. Window treatments, furniture and wall hangings all need to go. When the

 

  • floor extends in a closet, avoid all the closet contents

 

  • Cover up the light fixtures. A trash bag on all the fixtures will work fine. Protect it using masking tape

 

  • Remove the show moulding. It is not required to eliminate baseboards as long as you don’t plan on replacing

 

  • them. To avoid show moulding, hold a pry bar between the wall and moulding. Insert a small piece of wood at the back of the bar to provide leverage and prevent damage

 

  • Tape each opening, including vent ducts, light switches and electrical outlets particularly. Close off the room from the remaining part of home by sealing the door using masking tape and with hanging plastic sheet across the door opening.

 

Floor sanding

 

Proper sanding is necessary to sand the floor and to get back the grain, which is one of the highly desirable aspects of hardwood flooring. Sanding tools for hardwood refinishing will help to acquire a smooth finish. They offer ventilation while staining and sanding. An open window with fan is a best idea, particularly as the door is sealed.

 

The drum sander is the main tool you will need. Though it is not a part of homeowners’ tool collections, it is available readily as a rental tool. Drum sanders are capable of removing a lot of material quickly. Check out the tips to use drum sander for hardwood refinishing.

 

  • Start the sander when the machine is twisted back and not in touch with floor. Once it is up to complete revolutions, lower it down slowly to the floor surface

 

  • Start or use in an area which you know is covered by a large amount of furniture, like bed or sofa. By this way, any beginner sanding flaws can be concealed.

 

  • Just keep it moving. It is not difficult to move backward or forward, just do not allow it stand while running

 

  • Use slowly and allow the machine perform the task

 

You are eliminating old stain and dirt and developing a new level surface, hence choose the initial sandpaper accordingly. Keep in mind the smaller the number of grit, the rougher is the sandpaper and more material it can remove. Start with coarse grit and then shift to finer grits as the floor starts to get smoother with every sanding.

 

The estimates of sanding grit differ according to your floor condition. Generally, start with twenty to sixty grit and stop with 120. You would choose to skip the twenty grit pass when the floor is comparatively smooth. Always make use of same grit progression on every area, whether edge, drum or hand sanding.

2 comments

Leave a comment: